SIB100 Slaved Indicator iOS App System
This system interfaces with the Onboard C-39/C-40 and MSI Indicators as a remote (slaved) weight indicator on our iOS app.
This system interfaces with the Onboard C-39/C-40 and MSI Indicators as a remote (slaved) weight indicator on our iOS app.
The SIB100 is designed to interface with the Onboard Weighing Systems C-39 & C-40 indicator to replace the Onboard Remote Analogue Meter P/N 210-180-00 (shown Below). The new C-40 does not support the Onboard Remote Analogue Meter and is why AKV developed the iOS App. As the App also supports the C-39, it therefore provides a common remote display between the two indicators. The App also supports the MSI indicators.
The SIB100 provides additional benefits by replacing the Onboard C30 data recorder (discontinued) by logging the pickup and drop off GPS coordinates for each load. This is then emailed by the pilot at mission completion in a formatted pdf report with individual loads and totals from within the app. App is configurable from 2,000 - 60,000 lbs (1,000 - 30,000 kg)
Included in this kit:
Available cycle counters for:
Approved for use in:
Any aircraft utilizing the Onboard C-39/C40 or MSI load Indicators.
NOTE: This system is not STC approved and is designed to be installed under the minor modification criteria. it is USB powered.